Redshift Serverless (IAM)
Last modified on July 30, 2025
Overview
A datasource consists of a database resource and the credentials used to access it. This guide describes how to add Redshift Serverless (IAM) as a datasource in the Admin UI.
Prerequisites
To add a datasource, make sure you have met the following prerequisites:
- Properly configure an account for your resource.
- The hostname or endpoint you enter for your resource must be accessible by at least one gateway or relay. To verify this, log in to the gateway or relay and use the
nc -zv <YOUR_HOSTNAME> <YOUR_PORT>
Netcat command. For example, usenc -zv testdb-01.fancy.org 5432
. If your gateway server can connect to this hostname, you can proceed.
-z
flag to check for listeners without sending data and the -v
flag to show verbose output. If you do not have Netcat, you can use a package manager such as APT (Advanced Package Tool) to install it. On Linux-based distributions, run apt-get install netcat
.Add a Resource
To add your Redshift Serverless (IAM) resource to StrongDM, use the following steps.
- Log in to the StrongDM Admin UI.
- Go to Resources > Datasources.
- Click Add datasource.
- Select Redshift Serverless (IAM) as the Datasource Type and set other configuration properties for your new database resource.
- Complete all required fields.
- Click Create to save the resource.
- Click the resource name to view status, diagnostic information, and setting details.
Resource properties
Configuration properties are visible when you add a datasource or when you click to view its settings. The following table describes the settings available for Redshift Serverless (IAM).
Property | Requirement | Description |
---|---|---|
Display Name | Required | Meaningful name to display the resource throughout StrongDM; exclude special characters like quotes (") or angle brackets (< or >) |
Datasource Type | Required | Select Redshift Serverless (IAM) |
Proxy Cluster | Required | Defaults to “None (use gateways)”; if using proxy clusters, select the appropriate cluster to proxy traffic to this resource |
Hostname | Required | Hostname for your resource; must be accessible to a gateway or relay |
Port | Required | Port to use when connecting to Redshift; default port value is 5439 |
Connectivity Mode | Required | Select either Virtual Networking Mode, which lets users connect to the resource with a software-defined, IP-based network; or Loopback Mode, which allows users to connect to the resource using the local loopback adapter in their operating system; this field is shown if Virtual Networking Mode is enabled for your organization |
IP Address | Optional | If Virtual Networking Mode is the selected connectivity mode, an IP address value in the configured Virtual Networking Mode subnet in the organization network settings; if Loopback Mode is the selected connectivity mode, an IP address value in the configured Loopback IP range in the organization network settings (by default, 127.0.0.1 ); if not specified, an available IP address in the configured IP address space for the selected connectivity mode will be automatically assigned; this field is shown if Virtual Networking Mode and/or multi-loopback mode is enabled for your organization |
Port Override | Optional | If Virtual Networking Mode is the selected connectivity mode, a port value between 1 and 65535 that is not already in use by another resource with the same IP address; if Loopback Mode is the selected connectivity mode, a port value between 1024 to 64999 that is not already in use by another resource with the same IP address; when left empty with Virtual Networking Mode, the system assigns the default port to this resource; when left empty for Loopback Mode, an available port that is not already in use by another resource is assigned; preferred port also can be modified later from the Port Overrides settings |
DNS | Optional | If Virtual Networking Mode is the selected connectivity mode, a unique hostname alias for this resource; when set, causes the desktop app to display this resource’s human-readable DNS name (for example, k8s.my-organization-name ) instead of the bind address that includes IP address and port (for example, 100.64.100.100:5432 ) |
Database | Required | Name of the database you will be connecting to with this datasource |
Restrict Database | Optional | When selected, limits all connections to the configured database |
Region | Required | AWS region to connect to (for example, us-east-1 ) |
Role Assumption ARN | Optional | Role ARN, such as arn:aws:iam::000000000000:role/RoleName , that allows users accessing this resource to assume a role using AWS AssumeRole functionality |
Workgroup | Required | Workgroup name in the AWS Console (for example, redshift-workgroup ) |
Resource Tags | Optional | Resource tags consisting of key-value pairs <KEY>=<VALUE> (for example, env=dev ) |
Secret Store options
By default, datasource credentials are stored in StrongDM. However, these credentials can also be saved in a secrets management tool.
Non-StrongDM options appear in the Secret Store dropdown if they are created under Settings > Secrets Management. When you select another Secret Store type, its unique properties display. For more details, see Configure Secret Store Integrations.
Resource status
After a resource is created, the Admin UI displays that resource as unhealthy until the health checks run successfully. When the resource is ready, the Health icon indicates a positive, green status.
When the resource does not display a positive status, click the resource name to go to the Diagnostics tab and check for errors.